Raimondi LRH174 luffing jib crane

The LRH174 is one of Raimondi’s range of luffing jib cranes

The Raimondi LRH174, a 10 tonne hydraulic luffer, has a tip load of 2,225 kg in Ultra-lift mode with two falls.

The reduced out of service radius is a major advantage of this crane: the LRH174 has an out of service of only 10 meters when compared with a traditional luffer at minimum double that radius. The hydraulic luffer boasts much easier installation, similar to that of flattop tower cranes, due to the lack of A-frame and tie rods used in traditional luffers. The jib is assembled at ground level in only one lift, so that the assembled jib and hoisting winch may be raised.

Preparation of the jib, hoisting winch and rope reeving are all completed at ground level reducing work at height requirements, while the hydraulic system provides end users with smooth and speedy luffing movement.

Raising the jib to 85 degrees takes only 1.8 minutes due to the powerful hydraulic unit installed in the LRH174.


Technical Data Standard Metric Imperial
Max Hook Height EN14439.C25 26.2M 86.0FT
26.2M 86.0FT
Max Lifting Capacity 10T 11
Max Radius 50M 164.0FT
Height of Tower 35.7M
Lifting Capacity At Max Radius 2.25T 2.5
Falls 1/2
Hoist Power 37/45kW 49.6/60.3hp
Slewing Gear 2 4kW 5.4hp
4kW 5.4hp
Luffing Gear Hydraulic 22kW Hydraulic 29.5hp

Resources & Downloads